» Bartels AutoEngineer » BAE Support » User Language| » Bartels AutoEngineer » BAE Support » User Language |
Bartels AutoEngineer® - SupportBartels AutoEngineer® User Language Updates |  |
| New User Language System Functions to be released with the next BAE Version | ||
| CAP - Schematic Capture (SCM) | Updated | |
|---|---|---|
| cap_getscclass | Get currently scanned SCM element class | 14/01/2013 |
| AR - Autorouter (AR) | Updated | |
| ar_getstrpar | Get Autorouter string parameter | 29/06/2012 |
| ar_setstrpar | Set Autorouter string parameter | 29/06/2012 |
| Changes to User Language System Functions to be released with the next BAE Version | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Updated | |
| bae_dialaddcontrol | BAE dialog element definition
(05/04/2013) Tooltip string definitions for action buttons implemented and references to external bitmap files for display in bitmap labels and buttons supported. |
05/04/2013 |
| bae_dialadvcontrol | Add advanced BAE dialog element
(05/04/2013) Tooltip string definitions for action buttons implemented and references to external bitmap files for display in bitmap labels and buttons supported. |
05/04/2013 |
| bae_getdblpar | Get BAE double parameter
(24/05/2013) Query parameters added. (14/01/2013) Query parameter added. (28/09/2012) Query parameter added. |
24/05/2013 |
| bae_getintpar | Get BAE integer parameter
(10/10/2013) Query parameter added. (24/05/2013) Query parameters added. (14/01/2013) Query parameters added. (29/06/2012) Query parameter added. |
10/10/2013 |
| bae_getstrpar | Get BAE string parameter
(24/05/2013) Query parameters added. (29/06/2012) Query parameters added. |
24/05/2013 |
| bae_setdblpar | Set BAE double parameter
(14/01/2013) Assignment parameter added. (28/09/2012) Assignment parameter added. |
14/01/2013 |
| bae_setintpar | Set BAE integer parameter
(10/10/2013) Assignment parameter added. (24/05/2013) Assignment parameters added. (14/01/2013) Assignment parameter added. |
10/10/2013 |
| bae_setstrpar | Set BAE string parameter
(24/05/2013) Assignment parameters added. |
24/05/2013 |
| SCM - Schematic Editor (SCM) | Updated | |
| scm_getintpar | Get SCM integer parameter
(14/01/2013) Query parameters added. (28/09/2012) Query parameter added. |
14/01/2013 |
| scm_getstrpar | Get SCM string parameter
(29/06/2012) Query parameter added. |
29/06/2012 |
| scm_setstrpar | Set SCM string parameter
(29/06/2012) Assignment parameter added. |
29/06/2012 |
| scm_setintpar | Set SCM integer parameter
(14/01/2013) Assignment parameters added. (28/09/2012) Assignment parameter added. |
14/01/2013 |
| GED - Layout Editor (GED) | Updated | |
| ged_asktreeidx | GED net selection
(28/09/2012) New net selection mode. |
28/09/2012 |
| ged_drcpath | GED trace test placement design rule check
(29/06/2012) Path connectivity checking mode added. |
29/06/2012 |
| ged_getsegmovmode | Get GED trace segment move mode
(29/06/2012) Trace segment move mode "Adjust next neighbours only" supported. |
29/06/2012 |
| ged_getdblpar | Get GED double parameter
(10/10/2013) Query parameters added. |
10/10/2013 |
| ged_getintpar | Get GED integer parameter
(10/10/2013) Query parameters added. (24/05/2013) Query parameter added. (14/01/2013) Query parameter added. (28/09/2012) Query parameters added. |
10/10/2013 |
| ged_getstrpar | Get GED string parameter
(29/06/2012) Query parameter added. |
29/06/2012 |
| ged_setsegmovmode | Set GED trace segment move mode
(29/06/2012) Trace segment move mode "Adjust next neighbours only" implemented. |
29/06/2012 |
| ged_setintpar | Set GED integer parameter
(10/10/2013) Assignment parameters added. (24/05/2013) Assignment parameter added. (14/01/2013) Assignment parameter added. (28/09/2012) Assignment parameters added. |
10/10/2013 |
| ged_setstrpar | Set GED string parameter
(29/06/2012) Assignment parameter added. |
29/06/2012 |
| AR - Autorouter (AR) | Updated | |
| ar_getintpar | Get Autorouter integer parameter
(10/10/2013) Query parameter added. |
10/10/2013 |
| ar_setintpar | Set Autorouter integer parameter
(10/10/2013) Assignment parameter added. |
10/10/2013 |
| CAM - CAM Processor (CAM) | Updated | |
| cam_getintpar | Get CAM Processor integer parameter
(10/10/2013) Query parameters added. |
10/10/2013 |
| cam_setintpar | Set CAM Processor integer parameter
(10/10/2013) Assignment parameters added. |
10/10/2013 |
| New User Language System Functions released with BAE Version 7.8 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
|---|---|---|
| bae_msgprogressrep | Activate/update BAE progress display | 21/10/2011 |
| bae_msgprogressterm | Terminate BAE progress display | 21/10/2011 |
| strgetconffilename | Get environment variable expanded configuration file name | 08/08/2011 |
| CAP - Schematic Capture (SCM) | Released | |
| cap_getscbustapidx | Get currently scanned SCM bus tap | 14/07/2011 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_checkbustapplot | Get SCM bus tap plot status | 14/07/2011 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| lay_getscclass | Get currently scanned layout class | 27/04/2012 |
| lay_setfigcache | Fill layout figure list access cache | 08/08/2011 |
| Changes to User Language System Functions released with BAE Version 7.8 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_askmenu | Interactive BAE menu query
(04/03/2011) Maximum number of menu entries increased from 30 to 50. |
04/03/2011 |
| bae_getdblpar | Get BAE double parameter
(09/03/2012) Query parameters added. |
09/03/2012 |
| bae_getintpar | Get BAE integer parameter
(09/03/2012) Query parameters added. (21/10/2011) Query parameters added. (06/05/2011) Query parameters added. (04/03/2011) Query parameter added. |
09/03/2012 |
| bae_getstrpar | Get BAE string parameter
(08/08/2011) Query parameter added. (06/05/2011) Query parameter added. (04/03/2011) Query parameters added. |
08/08/2011 |
| bae_setintpar | Set BAE integer parameter
(09/03/2012) Assignment parameter added. (21/10/2011) Assignment parameters added. (06/05/2011) Assignment parameters added. (04/03/2011) Assignment parameter added. |
09/03/2012 |
| bae_setstrpar | Set BAE string parameter
(09/03/2012) Assignment parameter added. (06/05/2011) Assignment parameter added. (04/03/2011) Assignment parameters added. |
09/03/2012 |
| fopen | Open a file
(04/03/2011) File access mode extended to support autoclose modes. |
04/03/2011 |
| remove | Delete a file or directory
(09/03/2012) Function modified to allow for the deletion of directories. |
09/03/2012 |
| scandirfnames | Scan directory file names
(03/12/2010) File name cache modified to between register directory content changes between consecutive scans of the same directory. |
03/12/2010 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_getintpar | Get SCM integer parameter
(30/09/2011) Query parameters added. (08/08/2011) Query parameter added. (04/03/2011) Query parameter added. |
30/09/2011 |
| scm_getstrpar | Get SCM string parameter
(30/09/2011) Query parameters added. |
30/09/2011 |
| scm_pickelem | Pick SCM figure list element
(30/09/2011) Pick element type parameter value range extended to support symbol attribute picks. |
30/09/2011 |
| scm_setintpar | Set SCM integer parameter
(30/09/2011) Assignment parameters added. (04/03/2011) Assignment parameter added. |
30/09/2011 |
| GED - Layout Editor (GED) | Released | |
| ged_getintpar | Get GED integer parameter
(27/04/2012) Query parameters added. (06/05/2011) Query parameter added. (04/03/2011) Query parameters added. (06/12/2010) Query parameters added. |
27/04/2012 |
| ged_setintpar | Set GED integer parameter
(27/04/2012) Assignment parameters added. (06/05/2011) Assignment parameter added. (04/03/2011) Assignment parameters added. (06/12/2010) Assignment parameters added. |
27/04/2012 |
| AR - Autorouter (AR) | Released | |
| ar_getintpar | Get Autorouter integer parameter
(04/03/2011) Query parameter added. (06/12/2010) Query parameter added. |
04/03/2011 |
| ar_setintpar | Set Autorouter integer parameter
(04/03/2011) Assignment parameter added. (06/12/2010) Assignment parameter added. |
04/03/2011 |
| CAM - CAM Processor (CAM) | Released | |
| cam_getintpar | Get CAM integer parameter
(09/03/2012) Query parameter added. (30/09/2011) Query parameter added. (08/08/2011) Query parameter added. (04/03/2011) Query parameter added. (06/12/2010) Query parameter added. |
09/03/2012 |
| cam_setintpar | Set CAM integer parameter
(09/03/2012) Assignment parameter added. (30/09/2011) Assignment parameter added. (08/08/2011) Assignment parameter added. (04/03/2011) Assignment parameter added. (06/12/2010) Assignment parameter added. |
09/03/2012 |
| New User Language Index Variable Types released with BAE Version 7.6 | ||
| LAY - PCB Layout (GED, AR, CAM) | Released | |
|---|---|---|
| L_DRCERROROK | Layout DRC Error Acceptance | 01/10/2010 |
| CV - CAM View (CV) | Released | |
| CV_DATASET | CAM View Data Set | 25/06/2010 |
| Changes to User Language Index Variable Types released with BAE Version 7.6 | ||
| CAP - Schematic Capture (SCM) | Released | |
| CL_CPIN | Layout Net List Part Pin Entry
(23/04/2010) CL_ATTRIBUTE of index data access corrected.
|
23/04/2010 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| L_DRCERROR | Layout DRC Error Marker
(01/10/2010) IDSTR attribute for querying the error id for DRC error acceptance modes added.
|
01/10/2010 |
| New User Language System Functions released with BAE Version 7.6 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| strlistitemadd | Add string to string list | 19/10/2010 |
| strlistitemchk | Search string in string list | 08/10/2010 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| lay_doclayindex | Layout documentary layer display index | 19/10/2010 |
| GED - Layout Editor (GED) | Released | |
| ged_drcerrorhide | Set/reset GED DRC error acceptance mode | 01/10/2010 |
| Changes to User Language System Functions released with BAE Version 7.6 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_getdblpar | Get BAE double parameter
(25/06/2010) Query parameters added. |
25/06/2010 |
| bae_getintpar | Get BAE integer parameter
(25/06/2010) Query parameter added. (01/04/2010) Query parameters added. (05/03/2010) Query parameter added. |
25/06/2010 |
| bae_inpoint | Input BAE point/coordinates with mouse
(05/03/2010) Drawing mode parameter value range extenden by new mode (no window display, RMB immediate abort). |
05/03/2010 |
| bae_peekiact | BAE interaction queue query
(11/03/2010) Return value extended to return type code for the next automatic action in the interaction queue. |
11/03/2010 |
| bae_setintpar | Set BAE integer parameter
(25/06/2010) Assignment parameter added. (01/04/2010) Assignment parameters added. (05/03/2010) Assignment parameter added. |
25/06/2010 |
| CAP - Schematic Capture (SCM) | Released | |
| cap_layconload | Load layout net list
(19/02/2010) DDB file name and layout net list name parameters modified to allow for optional name queries to be activated through ? name specifications.
|
19/02/2010 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_getdblpar | Get SCM double parameter
(04/12/2009) Query parameter added. |
04/12/2009 |
| scm_getintpar | Get SCM integer parameter
(03/09/2010) Query parameters added. (25/06/2010) Query parameter added. (05/03/2010) Query parameters added. (18/12/2009) Query parameter added. (04/12/2009) Query parameters added. (27/11/2009) Query parameter added. |
03/09/2010 |
| scm_getstrpar | Get SCM string parameter
(01/10/2010) Query parameter added. (18/12/2009) Query parameter added. |
01/10/2010 |
| scm_pickelem | Pick SCM figure list element
(18/12/2009) Pick element type parameter value range extended to support named symbol and label reference picks. |
18/12/2009 |
| scm_setdblpar | Set SCM double parameter
(04/12/2009) Assignment parameter added. |
04/12/2009 |
| scm_setintpar | Set SCM integer parameter
(03/09/2010) Assignment parameters added. (25/06/2010) Assignment parameter added. (05/03/2010) Assignment parameters added. (18/12/2009) Assignment parameter added. (04/12/2009) Assignment parameters added. (27/11/2009) Assignment parameter added. |
03/09/2010 |
| scm_setstrpar | Set SCM string parameter
(01/10/2010) Assignment parameter added. |
01/10/2010 |
| GED - Layout Editor (GED) | Released | |
| ged_drcpath | GED trace test placement design rule check
(04/12/2009) Additional trace connectivity checking mode supported. |
04/12/2009 |
| ged_drcpoly | GED polygon test placement design rule check
(04/12/2009) Additional polygon connectivity checking mode supported. |
04/12/2009 |
| ged_drcvia | GED via test placement design rule check
(04/12/2009) Additional via connectivity checking mode supported. |
04/12/2009 |
| ged_getdblpar | Get GED double parameter
(19/02/2010) Query parameters added. (05/02/2010) Query parameters added. (27/11/2009) Query parameters added. |
19/02/2010 |
| ged_getintpar | Get GED integer parameter
(19/10/2010) Query parameter added. (03/09/2010) Query parameters added. (25/06/2010) Query parameter added. (05/03/2010) Query parameter added. (19/02/2010) Query parameter added. (05/02/2010) Query parameters added. (04/12/2009) Query parameter added. (27/11/2009) Query parameters added. |
19/10/2010 |
| ged_setdblpar | Set GED double parameter
(19/02/2010) Assignment parameters added. (05/02/2010) Assignment parameters added. (27/11/2009) Assignment parameters added. |
19/02/2010 |
| ged_setintpar | Set GED integer parameter
(19/10/2010) Assignment parameter added. (03/09/2010) Assignment parameters added. (25/06/2010) Assignment parameter added. (05/03/2010) Assignment parameter added. (19/02/2010) Assignment parameter added. (05/02/2010) Assignment parameters added. (04/12/2009) Assignment parameter added. (27/11/2009) Assignment parameters added. |
19/10/2010 |
| CV - CAM View (CV) | Released | |
| cv_getdblpar | Get CAM View double parameter
(27/11/2009) Query parameters added. |
27/11/2009 |
| cv_getintpar | Get CAM View integer parameter
(27/11/2009) Query parameters added. |
27/11/2009 |
| cv_setdblpar | Set CAM View double parameter
(27/11/2009) Assignment parameters added. |
27/11/2009 |
| cv_setintpar | Set CAM View integer parameter
(27/11/2009) Assignment parameters added. |
27/11/2009 |
| Changes to User Language Index Variable Types released with BAE Version 7.4 | ||
| LAY - PCB Layout (GED, AR, CAM) | Released | |
|---|---|---|
| L_DRCERROR | Layout DRC Error Marker
(19/10/2009) CHKDIST attribute for DRC clearance distance queries added.
(19/10/2009) ERRDIST attribute for current clearance distance queries added.
|
19/10/2009 |
| New User Language System Functions released with BAE Version 7.4 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_setclipboard | Store text string to BAE clipboard | 28/08/2009 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| lay_planmidlaycnt | Get layout inside layer count | 27/10/2009 |
| AR - Autorouter (AR) | Released | |
| ar_getdblpar | Get Autorouter double parameter | 14/11/2008 |
| ar_setdblpar | Set Autorouter double parameter | 14/11/2008 |
| Changes to User Language System Functions released with BAE Version 7.4 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_getintpar | Get BAE integer parameter
(28/08/2009) Query parameter added. (27/02/2009) Query parameters added. (19/12/2008) Query parameter added. |
28/08/2009 |
| bae_getstrpar | Get BAE string parameter
(28/08/2009) Query parameters added. (14/11/2008) Query parameter added. |
28/08/2009 |
| bae_inpoint | Input BAE point/coordinates with mouse
(27/02/2009) Rubberband centered zoom window mode added. |
27/02/2009 |
| bae_inpointmenu | Input BAE point/coordinates with mouse and right mouse button callback function
(27/02/2009) Rubberband centered zoom window mode added. |
27/02/2009 |
| bae_nameadd | Add BAE name selection list element
(19/12/2008) Return value changed to name list index/ID. (19/12/2008) Sort mode for ID creation added. |
19/12/2008 |
| bae_nameget | Get BAE name selection list element
(19/12/2008) Name ID query supported. |
19/12/2008 |
| bae_setintpar | Set BAE integer parameter
(28/08/2009) Assignment parameter added. (27/02/2009) Assignment parameters added. |
28/08/2009 |
| bae_setstrpar | Set BAE string parameter
(28/08/2009) Assignment parameters added. (14/11/2008) Assignment parameter added. |
28/08/2009 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_getdblpar | Get SCM double parameter
(28/08/2009) Query parameter added. |
28/08/2009 |
| scm_getintpar | Get SCM integer parameter
(04/11/2009) Query parameter added. (28/08/2009) Query parameters added. (19/12/2008) Query parameter added. |
04/11/2009 |
| scm_getstrpar | Get SCM string parameter
(09/10/2009) Query parameters added. (28/08/2009) Query parameter added. |
09/10/2009 |
| scm_setdblpar | Set SCM double parameter
(28/08/2009) Assignment parameter added. |
28/08/2009 |
| scm_setintpar | Set SCM integer parameter
(04/11/2009) Assignment parameter added. (28/08/2009) Assignment parameters added. (19/12/2008) Assignment parameter added. |
04/11/2009 |
| GED - Layout Editor (GED) | Released | |
| ged_elemmirrchg | Change GED figure list element mirror mode
(28/08/2009) Mirror mode settings for fixed elements supported. |
28/08/2009 |
| ged_getdblpar | Get GED double parameter
(28/08/2009) Query parameters added. (14/11/2008) Query parameter added. |
28/08/2009 |
| ged_getintpar | Get GED integer parameter
(09/10/2009) Query parameter added. (28/08/2009) Query parameters added. (27/02/2009) Query parameter added. (19/12/2008) Query parameter added. (14/11/2008) Query parameter added. |
09/10/2009 |
| ged_getpickmode | Get GED element pick mode
(27/03/2009) New element pick mode for exclusive preference layer picks supported. |
27/03/2009 |
| ged_pickelem | Pick GED figure list element
(28/08/2009) New pick element type for picking trace corner points. |
28/08/2009 |
| ged_getsegmovmode | Get GED trace segment move mode
(19/10/2009) Support for "Open End Points - Follow Segment" trace segment move mode added. |
19/10/2009 |
| ged_getstrpar | Get GED string parameter
(28/08/2009) Query parameter added. (19/12/2008) Query parameter added. |
28/08/2009 |
| ged_setdblpar | Set GED double parameter
(28/08/2009) Assignment parameters added. (14/11/2008) Assignment parameter added. |
28/08/2009 |
| ged_setintpar | Set GED integer parameter
(09/10/2009) Assignment parameter added. (28/08/2009) Assignment parameters added. (27/02/2009) Assignment parameter added. (19/12/2008) Assignment parameter added. (14/11/2008) Assignment parameter added. |
09/10/2009 |
| ged_setpickmode | Set GED element pick mode
(27/03/2009) New element pick mode for exclusive preference layer picks added. |
27/03/2009 |
| ged_setsegmovmode | Set GED trace segment move mode
(19/10/2009) Support for "Open End Points - Follow Segment" trace segment move mode added. |
19/10/2009 |
| ged_setstrpar | Set GED string parameter
(19/12/2008) Assignment parameter added. |
19/12/2008 |
| ged_storepoly | Place GED internal polygon
(28/08/2009) Mirror view modes for fixed polygons supported. |
28/08/2009 |
| AR - Autorouter (AR) | Released | |
| ar_elemmirrchg | Change Autorouter figure list element mirror mode
(28/08/2009) Mirror mode settings for fixed elements supported. |
28/08/2009 |
| ar_getintpar | Get Autorouter integer parameter
(09/10/2009) Query parameter added. (27/03/2009) Query parameters added. (14/11/2008) Query parameter added. |
09/10/2009 |
| ar_pickelem | Pick Autorouter figure list element
(28/08/2009) New pick element type for picking trace corner points. |
28/08/2009 |
| ar_setdblpar | Set Autorouter double parameter
(14/11/2008) Assignment parameter added. |
14/11/2008 |
| ar_setintpar | Set Autorouter integer parameter
(09/10/2009) Assignment parameter added. |
09/10/2009 |
| CED - Chip Editor (CED) | Released | |
| ced_pickelem | Pick CED figure list element
(28/08/2009) New pick element type for picking trace corner points. |
28/08/2009 |
| New User Language System Functions released with BAE Version 7.2 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
|---|---|---|
| bae_storecmdbuf | Store BAE command to command history | 06/10/2008 |
| catextadv | Optionally concatenate file name extension | 27/10/2008 |
| putenv | Set environment variable | 06/10/2008 |
| ulsystem_exit | Run a User Language program after exiting current User Language program | 27/10/2008 |
| CAP - Schematic Capture (SCM) | Released | |
| cap_lastconseg | Get last modified SCM connection segment | 19/09/2008 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_getdblpar | Get SCM double parameter | 07/12/2007 |
| scm_setdblpar | Set SCM double parameter | 07/12/2007 |
| scm_setpickconseg | Set SCM default connection pick element | 18/07/2008 |
| GED - Layout Editor (GED) | Released | |
| ged_getdblpar | Get GED double parameter | 02/05/2008 |
| ged_setdblpar | Set GED double parameter | 02/05/2008 |
| Changes to User Language System Functions released with BAE Version 7.2 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_defmenusel | Set BAE menu default selection
(28/05/2008) Input parameter value range extended to allow for selection text store access. |
28/05/2008 |
| bae_getdblpar | Get BAE double parameter
(28/05/2008) Query parameters added. (12/12/2007) Query parameter added. |
28/05/2008 |
| bae_getintpar | Get BAE integer parameter
(27/10/2008) Query parameter added. (29/08/2008) Query parameters added. (27/06/2008) Query parameters added. (25/04/2008) Query parameters added. |
27/10/2008 |
| bae_getstrpar | Get BAE string parameter
(28/05/2008) Query parameter added. (25/04/2008) Query parameter added. |
28/05/2008 |
| bae_inpoint | Input BAE point/coordinates with mouse
(09/05/2008) Rubberband fixed mode added. (02/05/2008) Rubberband drawing modes added. |
09/05/2008 |
| bae_inpointmenu | Input BAE point/coordinates with mouse and right mouse button callback function
(09/05/2008) Rubberband fixed mode added. (02/05/2008) Rubberband drawing modes added. |
09/05/2008 |
| bae_setdblpar | Set BAE double parameter
(28/05/2008) Assignment parameters added. (09/05/2008) Assignment parameters added. (12/12/2007) Assignment parameter added. |
28/05/2008 |
| bae_setintpar | Set BAE integer parameter
(27/10/2008) Assignment parameter added. (29/08/2008) Assignment parameters added. (27/06/2008) Assignment parameters added. (25/04/2008) Assignment parameters added. |
27/10/2008 |
| bae_setstrpar | Set BAE string parameter
(28/05/2008) Assignment parameter added. (25/04/2008) Assignment parameter added. |
28/05/2008 |
| ddbsetelemcomment | Set DDB file element comment
(15/02/2008) DDB element comment also assigned in main memory if processed DDB element currently loaded in BAE. |
15/02/2008 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_getintpar | Get SCM integer parameter
(27/10/2008) Query parameters added. (18/07/2008) Query parameter added. (09/05/2008) Query parameter added. (25/04/2008) Query parameters added. (12/12/2007) Query parameter added. (07/12/2007) Query parameter added. |
27/10/2008 |
| scm_setintpar | Set SCM integer parameter
(27/10/2008) Assignment parameters added. (18/07/2008) Assignment parameter added. (09/05/2008) Assignment parameter added. (25/04/2008) Assignment parameters added. (12/12/2007) Assignment parameter added. (07/12/2007) Assignment parameter added. |
27/10/2008 |
| GED - Layout Editor (GED) | Released | |
| ged_getdblpar | Get GED double parameter
(27/10/2008) Query parameters added. (29/08/2008) Query parameter added. |
27/10/2008 |
| ged_getintpar | Get GED integer parameter
(27/10/2008) Query parameters added. (29/08/2008) Query parameter added. (18/07/2008) Query parameters added. (25/04/2008) Query parameters added. (12/12/2007) Query parameter added. (07/12/2007) Query parameter added. |
27/10/2008 |
| ged_getstrpar | Get GED string parameter
(02/05/2008) Query parameters added. (25/04/2008) Query parameter added. |
02/05/2008 |
| ged_highlnet | Set GED net highlight mode/color
(27/10/2008) Input parameter value range extended to support highlight patterns. |
27/10/2008 |
| ged_setdblpar | Set GED double parameter
(27/10/2008) Assignment parameters added. (29/08/2008) Assignment parameter added. |
27/10/2008 |
| ged_setintpar | Set GED integer parameter
(27/10/2008) Assignment parameters added. (29/08/2008) Assignment parameter added. (18/07/2008) Assignment parameters added. (25/04/2008) Assignment parameters added. (12/12/2007) Assignment parameter added. (07/12/2007) Assignment parameter added. |
27/10/2008 |
| ged_setstrpar | Set GED string parameter
(02/05/2008) Assignment parameters added. (25/04/2008) Assignment parameter added. |
02/05/2008 |
| AR - Autorouter (AR) | Released | |
| ar_getintpar | Get Autorouter integer parameter
(27/10/2008) Query parameter added. |
27/10/2008 |
| ar_setintpar | Set Autorouter integer parameter
(27/10/2008) Assignment parameter added. |
27/10/2008 |
| CAM - CAM Processor (CAM) | Released | |
| cam_getdblpar | Get CAM double parameter
(26/09/2008) Query parameters added. |
26/09/2008 |
| cam_getintpar | Get CAM integer parameter
(27/10/2008) Query parameters added. (26/09/2008) Query parameter added. (25/04/2008) Query parameter added. (29/02/2008) Query parameter added. |
27/10/2008 |
| cam_setdblpar | Set CAM double parameter
(26/09/2008) Assignment parameters added. |
26/09/2008 |
| cam_setintpar | Set CAM integer parameter
(27/10/2008) Assignment parameter added. (25/04/2008) Assignment parameter added. (29/02/2008) Assignment parameter added. |
27/10/2008 |
| Changes to User Language Index Variable Types released with BAE Version 7.0 | ||
| LAY - PCB Layout (GED, AR, CAM) | Released | |
|---|---|---|
| L_POWLAYER | Layout Power Layer
(30/10/2007) LAYER attribute for power layer code queries added.
|
30/10/2007 |
| New User Language System Functions released with BAE Version 7.0 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_dialaskcall | Activate BAE dialog with listbox element callback function | 26/01/2007 |
| bae_dialboxperm | Activate modeless BAE dialog | 26/01/2007 |
| bae_dialsetcurrent | Set current BAE dialog box | 26/01/2007 |
| bae_nameget | Get BAE name selection list element | 30/10/2007 |
| filemode | Get file mode | 30/10/2007 |
| namestrcmp | Name string compare | 30/10/2007 |
| quicksort | Sort index list | 30/10/2007 |
| CAP - Schematic Capture (SCM) | Released | |
| cap_findlayconpartpin | Get layout connection list pin index | 19/11/2007 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| lay_findconpartpin | Find layout part pin index of a named part pin | 19/11/2007 |
| CAM - CAM Processor (CAM) | Released | |
| cam_getdblpar | Get CAM double parameter | 10/07/2007 |
| cam_setdblpar | Set CAM double parameter | 10/07/2007 |
| ICD - IC/ASIC Design (CED) | Released | |
| icd_findconpartpin | Find IC Design net index of a named net | 19/11/2007 |
| Changes to User Language System Functions released with BAE Version 7.0 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| askdist | Interactive distance value query
(10/07/2007) Additional types of user inputs for distance queries supported. |
10/07/2007 |
| bae_getintpar | Get BAE integer parameter
(10/07/2007) Query parameters added. |
10/07/2007 |
| bae_setintpar | Set BAE integer parameter
(10/07/2007) Assignment parameters added. |
10/07/2007 |
| con_setddbpattrib | Store part/pin attribute to DDB file
(02/03/2007) attribute value specification to remove attribute value assignment. |
02/03/2007 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_getintpar | Get SCM integer parameter
(31/10/2007) Query parameter added. |
31/10/2007 |
| scm_setintpar | Set SCM integer parameter
(31/10/2007) Assignment parameter added. |
31/10/2007 |
| GED - Layout Editor (GED) | Released | |
| ged_asktreeidx | GED net selection
(31/10/2007) New net name selection mode added. |
31/10/2007 |
| ged_elemgrpchg | Change GED figure list element group flag
(15/06/2007) Group status parameter value range modified to allow for the activation of a status line message about the selected/deselected element and the total number of group-selected elements |
15/06/2007 |
| ged_getintpar | Get GED integer parameter
(10/07/2007) Query parameters added. |
10/07/2007 |
| ged_getsegmovmode | Get GED trace segment move mode
(10/07/2007) Support for "Adjust neighbours without vias" trace segment move mode added. |
10/07/2007 |
| ged_getstrpar | Get GED string parameter
(31/10/2007) Query parameter added. |
31/10/2007 |
| ged_setintpar | Set GED integer parameter
(10/07/2007) Assignment parameters added. |
10/07/2007 |
| ged_setsegmovmode | Set GED trace segment move mode
(10/07/2007) Support for "Adjust neighbours without vias" trace segment move mode added. |
10/07/2007 |
| ged_setstrpar | Set GED string parameter
(31/10/2007) Assignment parameter added. |
31/10/2007 |
| CAM - CAM Processor (CAM) | Released | |
| cam_getintpar | Get CAM integer parameter
(17/08/2007) Query parameters added. |
17/08/2007 |
| cam_setintpar | Set CAM integer parameter
(17/08/2007) Assignment parameters added. |
17/08/2007 |
| CV - CAM View (CV) | Released | |
| cv_getdblpar | Get CAM View double parameter
(17/08/2007) Query parameters added. |
17/08/2007 |
| cv_getintpar | Get CAM View integer parameter
(17/08/2007) Query parameters added. |
17/08/2007 |
| cv_setdblpar | Set CAM View double parameter
(17/08/2007) Assignment parameters added. |
17/08/2007 |
| cv_setintpar | Set CAM View integer parameter
(17/08/2007) Assignment parameters added. |
17/08/2007 |
| New User Language System Functions released with BAE Version 6.8 | ||
| GED - Layout Editor (GED) | Released | |
|---|---|---|
| ged_getstrpar | Get GED string parameter | 06/09/2006 |
| ged_setstrpar | Set GED string parameter | 06/09/2006 |
| AR - Autorouter (AR) | Released | |
| ar_getintpar | Get Autorouter integer parameter | 06/09/2006 |
| ar_setintpar | Set Autorouter integer parameter | 06/09/2006 |
| CAM - CAM Processor (CAM) | Released | |
| cam_getintpar | Get CAM integer parameter | 06/09/2006 |
| cam_setintpar | Set CAM integer parameter | 06/09/2006 |
| Changes to User Language System Functions released with BAE Version 6.8 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_getintpar | Get BAE integer parameter
(06/09/2006) Query parameters added. |
06/09/2006 |
| bae_getstrpar | Get BAE string parameter
(06/09/2006) Query parameters added. |
06/09/2006 |
| bae_inpoint | Input BAE point/coordinates with mouse
(06/09/2006) New mode/parameter for activating rubberband distance display. |
06/09/2006 |
| bae_inpointmenu | Input BAE point/coordinates with mouse and right mouse button callback function
(06/09/2006) New mode/parameter for activating rubberband distance display. |
06/09/2006 |
| bae_setintpar | Set BAE integer parameter
(06/09/2006) Assignment parameters added. |
06/09/2006 |
| bae_setstrpar | Set BAE string parameter
(06/09/2006) Assignment parameters added. |
06/09/2006 |
| bae_storemouseiact | Store BAE mouse interaction to queue
(30/11/2005) Mouse pointer positioning and BAE window selection modes added. |
30/11/2005 |
| kbstate | Shift/control/alt key state query
(09/12/2005) Alt key state query added. |
09/12/2005 |
| sqlcmd | SQL command execution
(21/10/2005) cache command/support added.
|
21/10/2005 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_conseggrpchg | Change SCM connection segment group flag
(16/06/2006) New parameter value to support group selection status toggle. |
16/06/2006 |
| scm_elemgrpchg | Change SCM figure list element group flag
(16/06/2006) New parameter value to support group selection status toggle. |
16/06/2006 |
| scm_getintpar | Get SCM integer parameter
(06/09/2006) Query parameters added. |
06/09/2006 |
| scm_getstrpar | Get SCM string parameter
(06/09/2006) Query parameters added. |
06/09/2006 |
| scm_setintpar | Set SCM integer parameter
(06/09/2006) Assignment parameters added. |
06/09/2006 |
| scm_setstrpar | Set SCM string parameter
(06/09/2006) Assignment parameters added. |
06/09/2006 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| lay_getplanchkparam | Get layout DRC parameters
(06/09/2006) Default trace width function parameter added. (06/09/2006) Block name function parameter added. |
06/09/2006 |
| lay_setplanchkparam | Set layout DRC parameters
(06/09/2006) Default trace width function parameter added. (06/09/2006) Block name function parameter added. |
06/09/2006 |
| GED - Layout Editor (GED) | Released | |
| ged_elemgrpchg | Change GED figure list element group flag
(16/06/2006) New parameter value to support group selection status toggle. |
16/06/2006 |
| ged_getintpar | Get GED integer parameter
(06/09/2006) Query parameters added. |
06/09/2006 |
| ged_getstrpar | Get GED string parameter
(06/09/2006) Query parameters added. |
06/09/2006 |
| ged_groupselect | GED group selection
(16/06/2006) New parameter value to support group selection status toggle. |
16/06/2006 |
| ged_layergrpchg | Select GED group by layer
(16/06/2006) New parameter value to support group selection status toggle. |
16/06/2006 |
| ged_partnamechg | Change GED part name
(03/02/2006) Support for renaming non-netlist parts. |
03/02/2006 |
| ged_setintpar | Set GED integer parameter
(06/09/2006) Assignment parameters added. |
06/09/2006 |
| ged_setstrpar | Set GED string parameter
(06/09/2006) Assignment parameters added. |
06/09/2006 |
| New User Language System Functions released with BAE Version 6.6 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
|---|---|---|
| bae_askname | Activate BAE name selection dialog | 06/09/2005 |
| bae_crossarcarc | Determine cross point(s) of two arcs | 06/09/2005 |
| bae_crosslineline | Determine cross point of wide line segments | 06/09/2005 |
| bae_crosslinepoly | Determine cross point of wide line with polygon | 06/09/2005 |
| bae_crosssegarc | Determine cross point(s) of segment with arc | 06/09/2005 |
| bae_crosssegseg | Determine cross point of segments/lines | 06/09/2005 |
| bae_dialboxbufload | Restore BAE dialog box data from buffer | 06/09/2005 |
| bae_dialboxbufstore | Store BAE dialog box data to buffer | 06/09/2005 |
| bae_getdblpar | Get BAE double parameter | 06/09/2005 |
| bae_getintpar | Get BAE integer parameter | 06/09/2005 |
| bae_getpacktime | Get last project Packager run date/time | 06/09/2005 |
| bae_getstrpar | Get BAE string parameter | 06/09/2005 |
| bae_nameadd | Add BAE name selection list element | 06/09/2005 |
| bae_nameclr | Clear BAE name selection list | 06/09/2005 |
| bae_setdblpar | Set BAE double parameter | 06/09/2005 |
| bae_setintpar | Set BAE integer parameter | 06/09/2005 |
| bae_setstrpar | Set BAE string parameter | 06/09/2005 |
| ddbgetelemcomment | Get DDB file element comment | 06/09/2005 |
| ddbrenameelem | Rename DDB file element | 06/09/2005 |
| ddbsetelemcomment | Set DDB file element comment | 06/09/2005 |
| kbstate | Shift/control key state query | 06/09/2005 |
| CAP - Schematic Capture (SCM) | Released | |
| cap_gettagdata | Get SCM tag symbol destination data | 06/09/2005 |
| cap_getscstkcnt | Get SCM scan function stack depth | 06/09/2005 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_drawelem | Redraw SCM figure list element | 06/09/2005 |
| scm_findpartplc | Layout part placement status query (BAE HighEnd) | 06/09/2005 |
| scm_getgroupdata | SCM group placement data query | 06/09/2005 |
| scm_getinputdata | SCM input data query | 06/09/2005 |
| scm_getstrpar | Get SCM string parameter | 06/09/2005 |
| scm_pickanyelem | Pick any SCM figure list element | 06/09/2005 |
| scm_setpickelem | Set SCM default pick element | 06/09/2005 |
| scm_setstrpar | Set SCM string parameter | 06/09/2005 |
| scm_settagdata | Set SCM tag symbol pin destination | 06/09/2005 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| lay_getscstkcnt | Get layout scan function stack depth | 06/09/2005 |
| GED - Layout Editor (GED) | Released | |
| ged_drawelem | Redraw GED figure list element | 06/09/2005 |
| ged_pickanyelem | Pick any GED figure list element | 06/09/2005 |
| AR - Autorouter (AR) | Released | |
| ar_drawelem | Redraw Autorouter figure list element | 06/09/2005 |
| CV - CAM View (CV) | Released | |
| cv_aptgetcolor | Get CAM View aperture color | 06/09/2005 |
| cv_aptsetcolor | Set CAM View aperture color | 06/09/2005 |
| cv_deldataset | Delete CAM View data set | 06/09/2005 |
| cv_getdblpar | Get CAM View double parameter | 06/09/2005 |
| cv_movedataset | Move CAM View data set | 06/09/2005 |
| cv_setdblpar | Set CAM View double parameter | 06/09/2005 |
| CED - Chip Editor (CED) | Released | |
| ced_drawelem | Redraw CED figure list element | 06/09/2005 |
| Changes to User Language System Functions released with BAE Version 6.6 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_inpoint | Input BAE point/coordinates with mouse
(23/03/2005) Rubberband circle display support added. |
23/03/2005 |
| bae_inpointmenu | Input BAE point/coordinates with mouse and right mouse button callback function
(23/03/2005) Rubberband circle display support added. |
23/03/2005 |
| syngetintpar | Get BNF/scanner integer parameter
(11/03/2005) Comment string callback function parameter support added. |
11/03/2005 |
| synparsefile | BNF/parser input file scan
(11/03/2005) Comment string callback function support added. |
11/03/2005 |
| synparsestring | BNF/parser string scan
(11/03/2005) Comment string callback function support added. |
11/03/2005 |
| synsetintpar | Set BNF/scanner integer parameter
(11/03/2005) Comment string callback function parameter support added. |
11/03/2005 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_getintpar | Get SCM integer parameter
(11/03/2005) New parameter query: Warning mode for connecting named nets. (18/03/2005) New parameter query: Element pick mode. |
18/03/2005 |
| scm_setintpar | Set SCM integer parameter
(11/03/2005) New parameter setting: Warning mode for connecting named nets. (18/03/2005) New parameter setting: Element pick mode. |
18/03/2005 |
| CV - CAM View (CV) | Released | |
| cv_getintpar | Get CAM View integer parameter
(11/03/2005) New parameter query: Display color table/assignment. (11/03/2005) New parameter query: Area display mode. |
11/03/2005 |
| cv_setintpar | Set CAM View integer parameter
(11/03/2005) New parameter setting: Display color table/assignment. (11/03/2005) New parameter setting: Area display mode. |
11/03/2005 |
| Changes to User Language Index Variable Types released with BAE Version 6.4 | ||
| CAP - Schematic Capture (SCM) | Released | |
|---|---|---|
| C_FIGURE | SCM Figure Element
(07/05/2004) NAME attribute to support SCM symbol part name pattern queries on SCM symbol level.
|
07/05/2004 |
| New User Language System Functions released with BAE Version 6.4 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_getmoduleid | Get BAE module id | 11/08/2004 |
| bae_numstring | Create numeric string | 11/08/2004 |
| bae_peekiact | BAE interaction queue query | 11/08/2004 |
| bae_setmoduleid | Set BAE module id | 11/08/2004 |
| convstring | Convert string | 11/08/2004 |
| syngetintpar | Get BNF/scanner integer parameter | 11/08/2004 |
| synsetintpar | Set BNF/scanner integer parameter | 11/08/2004 |
| CAP - Schematic Capture (SCM) | Released | |
| cap_getglobnetref | Get global net name reference | 11/08/2004 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_getintpar | Get SCM integer parameter | 07/05/2004 |
| scm_pickbustap | Pick SCM bus tap | 07/05/2004 |
| scm_setintpar | Set SCM integer parameter | 07/05/2004 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| lay_getsctextdest | Get scanned layout text line destination | 07/05/2004 |
| GED - Layout Editor (GED) | Released | |
| ged_getintpar | Get GED integer parameter | 07/05/2004 |
| ged_setintpar | Set GED integer parameter | 07/05/2004 |
| CV - CAM View (CV) | Released | |
| cv_getintpar | Get CAM View integer parameter | 07/05/2004 |
| cv_setintpar | Set CAM View integer parameter | 07/05/2004 |
| Changes to User Language System Functions released with BAE Version 6.4 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_swconfig | Get BAE software configuration
(13/02/2004) BAE version build number query mode added. |
13/02/2004 |
| perror | Print error message
(20/04/2004) Status line output inverted for short moment (single blink effect) for improved error indication. |
20/04/2004 |
| GED - Layout Editor (GED) | Released | |
| ged_groupselect | GED group selection
(29/03/2004) New mode for selecting/deselecting glued elements. |
29/03/2004 |
| Changes to User Language Index Variable Types released with BAE Version 6.2 | ||
| CAP - Schematic Capture (SCM) | Released | |
|---|---|---|
| C_POLY | SCM Polygon
(01/09/2003) DASHLEN, DASHSPC and DASH attributes added.
(01/09/2003) WIDTH attribute added.
|
01/09/2003 |
| C_TEXT | SCM Text
(01/09/2003) WIDTH attribute added.
|
01/09/2003 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| L_POLY | Layout Polygon
(01/09/2003) DASHLEN and DASHSPC attributes added.
(01/09/2003) WIDTH attribute added.
|
01/09/2003 |
| L_TEXT | Layout Text
(01/09/2003) WIDTH attribute added.
|
01/09/2003 |
| New User Language System Functions released with BAE Version 6.2 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| askcoord | Interactive X/Y coordinate value query | 02/05/2003 |
| bae_dashpolyline | Vectorize dashed BAE polygon | 02/05/2003 |
| bae_dialbmpalloc | Create BAE dialog bitmap | 18/03/2003 |
| bae_dialgettextlen | Get BAE dialog text length | 02/05/2003 |
| bae_getcmdbuf | BAE command history query | 02/05/2003 |
| bae_getgridmode | Get BAE grid dependency mode | 02/05/2003 |
| bae_getinvcolor | Get BAE color inversion mode | 02/05/2003 |
| bae_inpointmenu | Input BAE point/coordinates with mouse and right mouse button callback function | 18/03/2003 |
| bae_plansename | Get BAE destination element name | 02/05/2003 |
| bae_planfename | Get BAE destination element file name | 02/05/2003 |
| bae_popmouse | Get BAE popup/toolbar mouse position | 18/03/2003 |
| bae_setgridmode | Set BAE grid dependency mode | 02/05/2003 |
| getextprog | Get file type specific application | 02/05/2003 |
| mkdir | Create directory | 02/05/2003 |
| setprio | Set BAE process priority | 02/05/2003 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| lay_rulelaysatt | Attach rule(s) to layout layer stackup | 28/05/2003 |
| lay_rulelaysdet | Detach rules from layout layer stackup | 28/05/2003 |
| GED - Layout Editor (GED) | Released | |
| ged_getsegmovmode | Get GED trace segment move mode | 01/09/2003 |
| ged_getviaoptmode | Get GED trace via optimization mode | 01/09/2003 |
| ged_setpickelem | Set GED default pick element | 02/05/2003 |
| ged_setsegmovmode | Set GED trace segment move mode | 01/09/2003 |
| ged_setviaoptmode | Set GED trace via optimization mode | 01/09/2003 |
| Changes to User Language System Functions released with BAE Version 6.2 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_charsize | Get BAE text/character dimensions
(02/05/2003) Function parameter types changes from int to double.
|
02/05/2003 |
| bae_popsetarea | Activate/select BAE popup menu/area
(18/03/2003) Dialog bitmap support. |
18/03/2003 |
| bae_setpopdash | Set BAE popup/toolbar polygon dash line parameters
(02/05/2003) Relative dash line distance function parameter added. |
02/05/2003 |
| bae_settbsize | Define/display BAE toolbar area
(02/05/2003) Function parameter types changes from int to double.
|
02/05/2003 |
| bae_swversion | Get BAE software configuration
(18/03/2003) Class for querying operating system specific directory name delimiter added. |
18/03/2003 |
| bae_tbsize | Get BAE toolbar dimensions
(02/05/2003) Function parameter types changes from int to double.
|
02/05/2003 |
| GED - Layout Editor (GED) | Released | |
| ged_getautocornins | Get GED auto corner insertion input mode
(02/05/2003) Support for element type specific auto corner insertion modes. |
02/05/2003 |
| ged_setautocornins | Set GED auto corner insertion input mode
(02/05/2003) Support for element type specific auto corner insertion modes. |
02/05/2003 |
| New User Language System Functions released with BAE Version 6.0 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
|---|---|---|
| bae_getpolyrange | Get internal BAE polygon boundary range | 15/10/2002 |
| strextractfilepath | Extract directory name from a file path name string | 15/10/2002 |
| strgetvarfilename | Get environment variable expanded file name string | 15/10/2002 |
| strgetpurefilename | Extract file name from file path name string | 15/10/2002 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_askrefname | SCM reference name selection | 15/10/2002 |
| scm_asktreename | SCM net name selection | 15/10/2002 |
| LAY - PCB Layout (GED, AR, CAM) | Released | |
| lay_getpowpolystat | Get split power plane polygon status flags | 15/10/2002 |
| GED - Layout Editor (GED) | Released | |
| ged_getlaydefmode | Get GED default layer mode | 15/10/2002 |
| ged_getlayerdefault | Get GED default layer | 15/10/2002 |
| ged_powlayerrcnt | Get GED power layer error count | 15/10/2002 |
| ged_setlaydefmode | Set GED default layer mode | 15/10/2002 |
| ged_setlayerdefault | Set GED default layer | 15/10/2002 |
| Changes to User Language System Functions released with BAE Version 6.0 | ||
| GED - Layout Editor (GED) | Released | |
| ged_asklayer | GED layer selection
(15/10/2002) Layer query type for power layer selection. |
15/10/2002 |
| ged_asktreeidx | GED net selection
(15/10/2002) Parameter for returning the net name added. (15/10/2002) Mode for button display in net selection menu. |
15/10/2002 |
| New User Language Index Variable Types released with BAE Version 5.4 | ||
| CAP - Schematic Capture (SCM) | Released | |
|---|---|---|
| CL_ALTPLNAME | Layout Net List Alternate Part Package Type | 19/10/2001 |
| CL_ATTRIBUTE | Layout Net List Attribute | 19/10/2001 |
| CL_CNET | Layout Net List | 19/10/2001 |
| CL_CPART | Layout Net List Part Entry | 19/10/2001 |
| CL_CPIN | Layout Net List Part Pin Entry | 19/10/2001 |
| Changes to User Language Index Variable Types released with BAE Version 5.4 | ||
| ICD - IC/ASIC Design (CED) | Released | |
| I_FIGURE | IC Design Figure Element
(19/06/2002) RULEOBJID attribute added.
|
19/06/2002 |
| New User Language System Functions released with BAE Version 5.4 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_asksymname | Interactive BAE library element query | 15/05/2002 |
| bae_dialadvcontrol | Add advanced BAE dialog element | 15/05/2002 |
| bae_getpackdata | Get BAE Packager Data | 19/10/2001 |
| bae_setplanfname | Set BAE project file name | 19/10/2001 |
| launch | Pass command to operating system without waiting for completion | 19/10/2001 |
| rulecompile | Compile a rule definition | 19/06/2002 |
| CAP - Schematic Capture (SCM) | Released | |
| cap_findlayconpart | Get layout connection list part index | 19/10/2001 |
| cap_findlaycontree | Get layout connection list net name net index | 19/10/2001 |
| cap_getlaytreeidx | Get layout connection list net number net index | 19/10/2001 |
| cap_layconload | Load layout netlist | 19/10/2001 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_attachtextpos | Attach text position to SCM element | 19/10/2001 |
| scm_checkjunctplot | Get SCM junction point plot status | 19/10/2001 |
| scm_chkattrname | SCM attribute name validation | 15/05/2002 |
| scm_gethpglparam | SCM HPGL parameter query | 15/05/2002 |
| GED - Layout Editor (GED) | Released | |
| ged_askrefname | Interactive GED reference name query | 15/05/2002 |
| ged_asktreeidx | Interactive GED net query | 15/05/2002 |
| ged_attachtextpos | Attach text position to layout element | 19/10/2001 |
| CAM - CAM Processor (CAM) | Released | |
| cam_getdrlaccuracy | Get CAM drill tool tolerance | 19/10/2001 |
| cam_setdrlaccuracy | Set CAM drill tool tolerance | 19/10/2001 |
| Changes to User Language System Functions released with BAE Version 5.4 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| system | Pass command to operating system and wait for completion
(19/10/2001) Wait for command completion in any operating system environment. |
19/10/2001 |
| GED - Layout Editor (GED) | Released | |
| ged_groupselect | GED group selection
(15/03/2002) New modes/options for selecting elements with or without connection to specified tree/net numbers and for selecting elements by polygon type. |
15/03/2002 |
| New User Language System Functions released with BAE Version 5.0 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
|---|---|---|
| bae_getmenuitem | BAE menu item query | 23/03/2001 |
| CAP - Schematic Capture (SCM) | Released | |
| cap_figboxtest | Check SCM element rectangle cross | 08/06/2001 |
| cap_findblockname | Find SCM block circuit sheet with given block name | 30/03/2001 |
| cap_getscrefpidx | Get currently scanned SCM reference element | 20/03/2001 |
| cap_ruleconatt | Attach rule(s) to SCM connection segment | 08/06/2001 |
| cap_rulecondet | Detach rules from SCM connection segment | 08/06/2001 |
| SCM - Schematic Editor (SCM) | Released | |
| scm_gethighlnet | Get SCM net highlight mode | 30/03/2001 |
| scm_highlnet | Set SCM net highlight mode | 30/03/2001 |
| GED - Layout Editor (GED) | Released | |
| ged_drcpath | GED trace test placement design rule check | 30/03/2001 |
| ged_drcpoly | GED polygon test placement design rule check | 30/03/2001 |
| ged_drcvia | GED via test placement design rule check | 30/03/2001 |
| ged_getdrcstatus | Get GED DRC Completion Status | 30/03/2001 |
| ged_getdrcmarkmode | Get GED DRC Error Display Mode | 30/03/2001 |
| ged_getgroupdata | GED group placement data query | 30/03/2001 |
| ged_getinputdata | GED input data query | 09/11/2000 |
| ged_getpickmode | Get GED Element Pick Mode | 30/03/2001 |
| ged_setdrcmarkmode | Set GED DRC Error Display Mode | 30/03/2001 |
| ged_setpickmode | Set GED Element Pick Mode | 30/03/2001 |
| ICD - IC/ASIC Design (CED) | Released | |
| icd_getrulecnt | Get rule count for specific object | 21/07/2000 |
| icd_getrulename | Get rule name from specific object | 21/07/2000 |
| icd_lastfigelem | Get last modified IC Design figure list element | 10/07/2001 |
| icd_ruleerr | Rule System error code query | 21/07/2000 |
| icd_rulefigatt | Attach rule(s) to figure list element | 21/07/2000 |
| icd_rulefigdet | Detach rules from figure list element | 21/07/2000 |
| icd_ruleplanatt | Attach rule(s) to currently loaded element | 21/07/2000 |
| icd_ruleplandet | Detach rules from currently loaded element | 21/07/2000 |
| icd_rulequery | Perform rule query on specific object | 21/07/2000 |
| Changes to User Language System Functions released with BAE Version 5.0 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_askmenu | Interactive BAE menu query
(20/03/2001) Maximum number of menu entries increased from 15 to 30. |
20/03/2001 |
| bae_defmenusel | Set BAE menu default selection
(30/03/2001) Support for up to 30 menu items. |
30/03/2001 |
| bae_swconfig | Get BAE software configuration
(21/06/2001) BAE Schematics software query mode added. |
21/06/2001 |
| CAM - CAM Processor (CAM) | Released | |
| cam_getgerberapt | Get CAM Gerber aperture definition
(20/03/2001) Maximum Gerber table index increased from 200 to 900. |
20/03/2001 |
| cam_setgerberapt | Set CAM Gerber aperture definition
(20/03/2001) Maximum Gerber table index increased from 200 to 900. |
20/03/2001 |
| New User Language System Functions released with BAE Version 4.6 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
|---|---|---|
| bae_dialaddcontrol | BAE dialog element definition | 29/05/2000 |
| bae_dialaskparams | Activate BAE dialog | 29/05/2000 |
| bae_dialclr | Clear BAE dialog elements | 29/05/2000 |
| bae_dialgetdata | Get BAE dialog element parameter | 29/05/2000 |
| bae_dialsetdata | Set BAE dialog element parameter | 29/05/2000 |
| bae_plainmenutext | BAE menu item string conversion | 29/05/2000 |
| bae_postprocess | Run BAE postprocess | 29/05/2000 |
| bae_readedittext | BAE text input/display | 29/05/2000 |
| con_compileloglib | Compile logical library definition | 29/05/2000 |
| ddbgetlaypartpin | Get DDB file layout part pin data | 29/05/2000 |
| GED - Layout Editor (GED) | Released | |
| ged_gethighlnet | Get GED net highlight mode/color | 29/05/2000 |
| Changes to User Language System Functions released with BAE Version 4.6 | ||
| STD - Standard (SCM, GED, AR, CAM, CV, CED) | Released | |
| bae_swconfig | Get BAE software configuration
(21/07/2000) Added BAE Light software configuration check. |
21/07/2000 |
| GED - Layout Editor (GED) | Released | |
| ged_highlnet | Set net highlight mode/color
(29/05/2000) Second parameter to allow for optional highlight color specification. |
29/05/2000 |
| ged_storedrill | Place GED drill hole
(21/07/2000) Mirrored drill class definition support added. |
21/07/2000 |
| New User Language System Functions released with BAE Version 4.4 | ||
| AR - Autorouter (AR) | Released | |
|---|---|---|
| ar_rutgetdist | Get Autorouter distance parameters | 10/07/1998 |
| ar_rutsetdist | Set Autorouter distance parameters | 10/07/1998 |
| ar_rutsetlayat | Set/get Autorouter layer attributes | 10/07/1998 |
| ar_rutsetpar | Set/get Autorouter integer parameters | 10/07/1998 |
| » Bartels AutoEngineer » BAE Support » User Language |
Bartels AutoEngineer® - User Language Updates • © 1985-2017 Oliver Bartels F+E