Baumeister Mediasoft Engineering BME - Baumeister Mediasoft Engineering  Bartels AutoEngineer® Symbol and Part Libraries - English Version Bartels AutoEngineer® Symbol- und Bauteilbibliotheken - Deutsche Version
Baumeister Mediasoft Engineering
Bartels AutoEngineerCarLogServicesResourcesCompany ProfileContact Us
Baumeister Mediasoft Engineering » Bartels AutoEngineer » BAE Documentation » BAE Libraries

Bartels AutoEngineer® Symbol and Part Libraries

Bartels AutoEngineer®
Symbol and Part Libraries

The Bartels AutoEngineer® - Symbol and Part Libraries documentation contains detailed information about the symbol and part libraries provided with the Bartels AutoEngineer CAE/CAD/CAM design system.

 

Contents

Preface
Organization of this Documentation
Related Documentation
Problems, Questions, Suggestions
Documentation Notations
Documentation Conventions
Copyright
1Introduction
1.1General BAE Library Information
1.1.1Library Management Utilities
1.1.2Library Organization and Access
1.2Library Files
1.2.1Symbol and Part Library Statistics
1.2.2SCM Library Files
1.2.3Layout Library Files
2Schematic Libraries
2.1Standard Schematic Libraries
2.1.1Library STDSYM - Standard/Template Symbols, Labels
2.1.2Library ROUTE - Router Control, Rule System
2.1.3Library DEMOLIB - Tutorial Demo Library
2.1.4Library PASSIV - Passive Part Devices
2.1.5Library OPTO - Optoelectronic Devices
2.1.6Library CONNECT - Connectors
2.1.7Library MISC - Miscellaneous/Special
2.1.8Library DISCRETE - Discrete Semiconductor Devices
2.1.9Library LINEAR - Linear Semiconductor Devices
2.1.10Library MEMORY - Memory Devices (ROMs, PROMs, RAMs)
2.1.11Library PAL - Programmable Logic Devices (PALs, GALs)
2.2Digital Integrated Circuits - Logic Families
2.2.1Library CMOS - ICs Digital, CMOS Series 4xxx
2.2.2Library 74TTL - ICs Digital, Bipolar TTL Series 74TTL
2.2.3Library D74TTL - ICs Digital, Bipolar TTL Series 74TTL IEEE/DIN
2.2.4Library D54TTL - ICs Digital, Bipolar TTL Series 54TTL IEEE/DIN
2.2.5Library 74LS - ICs Digital, Bipolar TTL Series 74LS
2.2.6Library D74LS - ICs Digital, Bipolar TTL Series 74LS IEEE/DIN
2.2.7Library D54LS - ICs Digital, Bipolar TTL Series 54LS IEEE/DIN
2.2.8Library D74S - ICs Digital, Bipolar TTL Series 74S IEEE/DIN
2.2.9Library D54S - ICs Digital, Bipolar TTL Series 54S IEEE/DIN
2.2.10Library D74ALS - ICs Digital, Bipolar TTL Series 74ALS IEEE/DIN
2.2.11Library D54ALS - ICs Digital, Bipolar TTL Series 54ALS IEEE/DIN
2.2.12Library 74AS - ICs Digital, Bipolar TTL Series 74AS
2.2.13Library D74AS - ICs Digital, Bipolar TTL Series 74AS IEEE/DIN
2.2.14Library D54AS - ICs Digital, Bipolar TTL Series 54AS IEEE/DIN
2.2.15Library D74F - ICs Digital, Bipolar TTL Series 74F IEEE/DIN
2.2.16Library D54F - ICs Digital, Bipolar TTL Series 54F IEEE/DIN
2.2.17Library D74L - ICs Digital, Bipolar TTL Series 74L IEEE/DIN
2.2.18Library D54L - ICs Digital, Bipolar TTL Series 54L IEEE/DIN
2.2.19Library D74H - ICs Digital, Bipolar TTL Series 74H IEEE/DIN
2.2.20Library D54H - ICs Digital, Bipolar TTL Series 54H IEEE/DIN
2.2.21Library D74BCT - ICs Digital, Bipolar CMOS Series 74BCT IEEE/DIN
2.2.22Library D54BCT - ICs Digital, Bipolar CMOS Series 54BCT IEEE/DIN
2.2.23Library D74FCT - ICs Digital, Bipolar CMOS Series 74FCT IEEE/DIN
2.2.24Library D54FCT - ICs Digital, Bipolar CMOS Series 54FCT IEEE/DIN
2.2.25Library 74HC - ICs Digital, CMOS Series 74HC
2.2.26Library D74HC - ICs Digital, CMOS Series 74HC IEEE/DIN
2.2.27Library D54HC - ICs Digital, CMOS Series 54HC IEEE/DIN
2.2.28Library D74HCU - ICs Digital, CMOS Series 74HCU IEEE/DIN
2.2.29Library D74HCT - ICs Digital, CMOS Series 74HCT IEEE/DIN
2.2.20Library D54HCT - ICs Digital, CMOS Series 54HCT IEEE/DIN
2.2.31Library D74AC - ICs Digital, CMOS Series 74AC IEEE/DIN
2.2.32Library D54AC - ICs Digital, CMOS Series 54AC IEEE/DIN
2.2.33Library D74ACT - ICs Digital, CMOS Series 74ACT IEEE/DIN
2.2.34Library D54ACT - ICs Digital, CMOS Series 54ACT IEEE/DIN
2.2.35Library D74AC11 - ICs Digital, CMOS EPIC Series 74AC11 IEEE/DIN
2.2.36Library D54AC11 - ICs Digital, CMOS EPIC Series 54AC11 IEEE/DIN
2.2.37Library D74ACT11 - ICs Digital, CMOS EPIC Series 74ACT11 IEEE/DIN
2.2.38Library D54ACT11 - ICs Digital, CMOS EPIC Series 54ACT11 IEEE/DIN
2.3Manufacturer-specific Schematic Libraries
2.3.1Library AD - Manufacturer: Analog Devices, PMI
2.3.2Library ARIZONA - Manufacturer: Arizona Microchip
2.3.3Library ATT - Manufacturer: AT & T
2.3.4Library BURRB - Manufacturer: Burr Brown
2.3.5Library CYPRESS - Manufacturer: Cypress Semiconductor
2.3.6Library HITACHI - Manufacturer: Hitachi
2.3.7Library IDT - Manufacturer: Integrated Device Technology, Inc.
2.3.8Library INTEL - Manufacturer: Intel
2.3.9Library INTERSIL - Manufacturer: Intersil
2.3.10Library LSC - Manufacturer: Lattice Semiconductor Corporation
2.3.11Library LT - Manufacturer: Linear Technology
2.3.12Library MAXIM - Manufacturer: Maxim
2.3.13Library MC - Manufacturer: Motorola
2.3.14Library MICRON - Manufacturer: Micron Technology Inc.
2.3.15Library NSC - Manufacturer: National Semiconductor
2.3.17Library PHILIPS - Manufacturer: Philips
2.3.16Library RFMD - Manufacturer: RF Micro Devices
2.3.18Library SIEMENS - Manufacturer: Siemens AG
2.3.19Library STM - Manufacturer: SGS-Thomson
2.3.20Library TI - Manufacturer: Texas Instruments
2.3.21Library TOSHIBA - Manufacturer: Toshiba
2.3.22Library XICOR - Manufacturer: Xicor
2.3.23Library XILINX - Manufacturer: Xilinx
2.3.24Library ZILOG - Manufacturer: Zilog
3PCB Layout/Footprint Libraries
3.1Library DEMOLIB - Tutorial Demo Library
3.2Library LAYLIB - Standard Layout Library
3.3Library PDFPAGE - Layout Page Templates

 

Preface

The Bartels AutoEngineer® - Symbol and Part Libraries documentation contains detailed information about the symbol and part libraries provided with the Bartels AutoEngineer CAE/CAD/CAM design system.

The reader should be familiar with the use of the Bartels AutoEngineer software ist symbol and part library database concept.

Kindly note the Copyright before making use of the information provided with this documentation or applying the herein described products. The reader should also be familiar with the Notations and Conventions used throughout this documentation.

 

Organization of this Documentation

Chapter 1 provides some general information about the Bartels AutoEngineer symbol and parts libraries and lists the symbol and part library files provided with the Bartels AutoEngineer.
Chapter 2 provides detailed contents and reference tables for the Bartels AutoEngineer SCM symbol libraries.
Chapter 3 provides detailed contents and reference tables for the Bartels AutoEngineer PCB layout and footprint symbol libraries.
 

Related Documentation

The Bartels AutoEngineer® - Installation Guide describes the Bartels AutoEngineer configurations and system requirements and provides detailed Bartels AutoEngineer installation instructions for all supported hardware and software platforms.


The Bartels AutoEngineer® - User Manual describes in detail how to use the Bartels AutoEngineer CAE/CAD/CAM design system. The following main topics are covered by this manual:

  • Introduction: System Architecture, general Operating Instructions, Design Database
  • Circuit Design (CAE), Schematic Editor
  • Netlist Processing, Forward and Backward Annotation
  • PCB Design and manufacturing data processing (CAD/CAM), Layout Editor, Autoplacement, Autorouting, CAM Processor, CAM View
  • IC/ASIC Design, Chip Editor for interactive IC mask layout, Cell Placer and Cell Router for place & route, GDS and CIF import and export
  • Neural Rule System
  • Utility Programs

The Bartels User Language - Programmer's Guide describes how to use the Bartels User Language in Bartels AutoEngineer, i.e., how it is integrated to the Bartels AutoEngineer EDA system and how it can be applied. The following main topics are covered by this manual:

  • Basic concepts and description of the Bartels User Language
  • The Bartels User Language programming system:
    User Language Compiler and User Language Interpreter
  • User Language example source code listings, short information on the User Language programs supplied with the Bartels AutoEngineer
  • Special data types defined for accessing Bartels AutoEngineer design data
  • User Language system function reference
 

Problems, Questions, Suggestions

We appreciate comments from the people who use our system. In particular we are thankful for suggestions on how to improve the Bartels AutoEngineer and/or the Bartels User Language by introducing new or improving existing functions. Please do not hesitate to contact Bartels Support if you have questions or problems related to the use of the Bartels AutoEngineer. Check the Bartels Website at http://www.bartels.de for our address.

 

Documentation Notations

The reader should be familiar with the following notations used throughout the Bartels AutoEngineer documentation:

Mouse pointing device (mouse, trackball, etc.) to be used for moving the menu and graphic cursors as well as for selecting functions
Info Field menu field on the right top of the screen for displaying system status messages
Main Menu function menu permanently available in the upper right screen area used for selecting a subordinate function menu
Menu function menu in the lower right screen area currently selected from main menu
Submenu subordinate function menu in the lower right screen area activated intermediately whilst using another menu function
Graphic Workarea workarea for graphic interaction in the upper left screen area
Status Line lower left screen line used for displaying system status messages and for performing interactive user queries
Menu Cursor rectangle-shaped cursor for selecting a menu function
Graphic Cursor cross-shaped cursor in the graphic workarea (crosshairs)
Menu Prompt user query in the status line
Popup Menu menu optionally displayed on top of the graphic workarea for selecting function-specific objects or for activating menu-specific functions
Button selectable popup menu entry for choosing a certain menu element or for activating a menu-specific function
Select Function move menu cursor to a function of the currently active function menu
Activate hitting the mouse button
Pick select an object to be manipulated using the graphic cursor
Place move an element to a certain position in the graphic workarea
Select select an element to be manipulated or a function to be executed by pressing the mouse button
Confirm confirm the execution of a function verified by user query

The following acronyms are used throughout the Bartels AutoEngineer documentation:

BAE acronym for identifying the Bartels AutoEngineer EDA software
BAEICD acronym for the Bartels AutoEngineer IC/ASIC design system optionally included with workstation-based BAE configurations
SCM acronym for the Schematic Editor program module of the Bartels AutoEngineer circuit design system
GED acronym for the graphical PCB Layout Editor program module of the Bartels AutoEngineer PCB design system
AP acronym for the Autoplacement program module of the Bartels AutoEngineer PCB design system
AR acronym for the Autorouter program module of the Bartels AutoEngineer PCB design system
NAR acronym for the advanced Neural Autorouter program module of the Bartels AutoEngineer PCB design system
CAM acronym for the CAM Processor program module of the Bartels AutoEngineer PCB design system
CV acronym for the CAM View program module of the Bartels AutoEngineer PCB design system
CED acronym for the Chip Editor program module of the Bartels AutoEngineer IC/ASIC design system
CP acronym for the Cell Placement program module of the Bartels AutoEngineer IC/ASIC design system
CR acronym for the Cell Router program module of the Bartels AutoEngineer IC/ASIC design system
UL acronym for the Bartels User Language programming language
ULC acronym for the Bartels User Language Compiler
ULI acronym for the Bartels User Language Interpreter
 

Documentation Conventions

Unless otherwise mentioned, the following symbolic conventions are used throughout the Bartels AutoEngineer documentation:

LineprintLineprint font represents text output generated by the system.
BoldfaceBoldfaced words or characters in format or command descriptions represent topic definitions or syntactic terminals, i.e., commands or keywords to be inserted directly.
EmphasizeEmphasized text is used for optical accentuation.
" "Double quotes denote names and/or path names or enclose characters and/or character sequences directly to be inserted.
[ ]Square brackets enclose optional items in format or command descriptions.
{ }Braces enclose a list of items in format or command description, from which one has to be chosen.
|A vertical bar separates items in a list of choices.
< >Angle brackets enclose the logical name of a key on the keyboard. In format or command descriptions, angle brackets enclose values to be supplied.
>Boldfaced greater signs in lineprint font are used for denoting prompts on operating system level.
...Horizontal ellipsis points indicate either optional repetition of the preceding element in format or command descriptions or absence of irrelevant parts of a figure or example.
:Vertical ellipsis points indicate absence of irrelevant parts of a figure, an example or a format or command description.
any Mouse Button (MB)Any Mouse Button (MB)
Left Mouse Button (LMB)Left Mouse Button (LMB)
Middle Mouse Button (MMB)Middle Mouse Button (MMB)
Right Mouse Button (RMB)Right Mouse Button (RMB)
Return/Enter Key (CR)Keyboard (input) - Return/Enter key (CR)
a b ...Keyboard (input) - standard key(s)
F1 F2 ...Keyboard (input) - function key(s)
filenameFile or directory path name.
keywordTopic definitions or syntactic terminals, i.e., commands or keywords to be inserted directly.
messageBAE/system status or error message display.
MenuBartels AutoEngineer menu.
Menu FunctionBartels AutoEngineer menu function.
Menu OptionBartels AutoEngineer menu option.
ButtonBartels AutoEngineer (popup) menu button.
ul.ulh(Hypertext link to) Bartels User Language include file.
ulprog(Hypertext link to) Bartels User Language program description.
ul.ulc(Hypertext link to) Bartels User Language program source file.
ul_function(Hypertext link to) Bartels User Language system function description.
UL_INDEX(Hypertext link to) Bartels User Language index type description.
utilprog(Hypertext link to) Bartels AutoEngineer utility program description.
new featureNew features which are made available with regular (weekly) software updates/builds are highlighted in the online documentation.

The character sequences mentioned above may regain original meaning when used in programming languages, interpreter languages, specification languages, syntax description languages, etc.

 

Copyright

The information contained in the Bartels AutoEngineer publications as well as the products and/or programs described therein are subject to change without notice and should not be construed as a commitment by Bartels System.

Although Bartels System has gone to great effort to verify the integrity of the information provided with the Bartels AutoEngineer publications, these publications could contain technical inaccuracies or typographical errors. Bartels System shall not be liable for errors contained therein or for incidental consequential damages in connection with the furnishing, performance or use of this material. Bartels System appreciates readers' and/or users' comments in order to improve these publications and/or the products described therein. Changes are periodically made to the information therein. These changes will be incorporated in new editions of the Bartels AutoEngineer publications.

All rights reserved. No part of the Bartels AutoEngineer publications may be reproduced, stored in a retrieval system, translated, transcribed or transmitted, in any form or by any means manual, electric, electronic, electromagnetic, mechanical, chemical, optical or otherwise without prior express written permission from Bartels System.

Bartels AutoEngineer®, Bartels Router® and Bartels Autorouter® are registered trademarks of Bartels System. Bartels User Language™ and Bartels Neural Router™ are trademarks of Bartels System. All other products or services mentioned in this publication are identified by the trademarks or service marks of their respective companies or organizations.

Baumeister Mediasoft Engineering » Bartels AutoEngineer » BAE Documentation » BAE Libraries

Bartels AutoEngineer® - Symbol and Part Libraries • © 1985-2017 Oliver Bartels F+E • Updated: 19 November 2009, 18:17 [UTC]

Baumeister Mediasoft Engineering, Clontarf, Dublin 3, Ireland
© 2017 Manfred Baumeister

Bartels AutoEngineer® Symbol and Part Libraries - English Version Bartels AutoEngineer® Symbol- und Bauteilbibliotheken - Deutsche Version